cutting speed
英 [ˈkʌtɪŋ spiːd]
美 [ˈkʌtɪŋ spiːd]
切削速度；切割速度
双语例句
- CO2 lasers is conducted to cutting die-board with the aim of discussing the relationship between cutting depth and parameters such as laser power, cutting speed and focal position.
采用CO2激光切割模切板，研究激光功率、切割速度、焦点位置等参数和切割深度之间的相互关系，研究如何确定最大切割速度和优化切割速度。 - Productivity is cutting speed cost and not per hour cost.
生产力是切割速度成本，不是每小时成本。 - The cutting speed can be adjusted by stepless frequency conversion to suit materials in different hardness.
切削速度可以无级变频调速，以适应不同硬度材料加工。 - The relationships between the cutting speed and a incised workpiece of intension, thickness are analyzed.
通过试验，分析了被切割工件强度和厚度与切割速度之间的关系。 - Tests are conducted to find the rules how such cutting parameters as cutting depth, cutting speed and feedrate per blade as well as the cutting angle affect on the life of face mill.
通过试验，找出了切削深度、切削速度、每齿进给量等切削用量及切出角影响面铣刀寿命的规律。 - It is shown that the diamonds with coatings can enhance the service life of the sawblade and obtain a maximum cutting speed at lower concentration of diamonds.
结果表明：金刚石镀膜不仅能够提高锯片的切割寿命，而且可以在降低金刚石浓度的情况下达到最大切割速度。 - Fortunately, the correct cutting speed can estimated with reasonable accuracy from tool-life graphs or form the Taylor Tool Life Relationship, provided that necessary data are obtainable.
幸运的是，合适的切削速度可以从刀具寿命表或泰勒刀具寿命关系中以合理的精度评估，证明了必然的数据是可以获得的。 - The blade cutting edge has the advantages of reasonable design, long service life, high cutting speed, being suitable for harvesting crops, such as rice, wheat, soybean, etc.
刀片刃口设计合理，使用寿命长，切割速度快。适用于收割水稻、小麦、大豆等庄稼作物。 - The basic structure of hobbing-shaving cutter was improved, the processing principle and cutting speed of the free hobbing-shaving machining are analyzed.
研究了硬齿面齿轮的自由滚剃机理，改进了滚剃刀的基本结构，并分析了自由滚剃的加工原理和切削速度。 - Exact size and high cutting speed.
尺寸精准，切割速度高。 - Cutting speed influents chip dimension.
切削速度对切屑形状的尺寸大小有影响。 - Granularity has great influences on the surface finish and integral cutting speed.
粒度对表面光洁度和整体切割速度具有重大影响。 - Away from the hydraulic control of cutting speed stepless.
走速度由液力控制实现无级调速。 - The material of the gun reamer blade should meet the good abradability, the high cutting speed and the precision retentivity. Recommended for heavy duty machining of soft aluminium and ferrous materials, such as tapping, ream and sawing.
枪铰刀刀片材料选择应满足枪铰刀耐磨性好、高的切削速度、较好的精度保持性；推荐使用于软铝、黑色金属的重负荷加工，如，切螺纹、铰孔和锯削等。 - The experimental result indicates that cutting speed, precise process and surface quality of the combined USM and ECM machining are all greatly improved compared with those of the USM or ECM.
试验结果表明，超声电解复合加工和单一的超声加工、电解加工比较可显著提高其加工速度、加工精度及表明质量。 - The results show that the kerf width increases with the increase of laser power, pulse frequency, pulse width and assist gas pressure, but decreases with the increase of cutting speed.
结果表明：缝宽随输出功率、频率、脉宽及辅助氧压的增大而增加，随着切割速度的增加而减小。 - There are also other variables that affect the optimal value of the surface cutting speed.
也还存在其它一些变量影响表面切削速度的最佳值。 - The influences of cutting speed on cutting forces, surface roughness, surface microstructure, and tool wear have been studied by the experiments.
深入分析了铣削速度对铣削力、表面粗糙度、表面形貌和刀具的磨损的影响。 - Please increase cutting speed and decrease feed ratio.
提高切削速度，降低进给量。 - Increase of cutting ability or slowing down of cutting speed can reduce the kind of lag error.
增加切割能力或减缓切割速度即可减少这种滞后误差。 - The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。 - It features high cutting speed, narrow gap, low distortion, materials saving and low cost.
具有切割速度快、切口窄、变形小、节省材料、成本低等优点。 - Influence of Cutting Speed on Temperature Distribution in Cutting Process
切削速度对切削过程温度分布影响的研究 - Automatic tracking the cutting speed: do not need to change the cutting angle if the glass ribbon speed changed.
切割速度自动跟踪：玻璃带速度发生变化，不需要改变切割角度。 - Cutting speed is related to the thickness and hardness of materials to be cut.
切割速度是与所需切割的材料厚度及材质的硬度相关联的。 - The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.
选择正确的切削速度对所有金属的切削操作有着重要的经济上的影响。 - Effect of Cutting Speed and Feed Rate on UVC Hard Cutting
切削速度与进给量对UVC硬态切削加工的影响 - Superior cutting speed and cutting capacity;
卓越的切割速度和切割能力； - In the machining, working liquid plays roles of insulation, flushing, chip-removal, cooling and it can affect cutting speed, surface roughness, machining precision and so on.
工作液在加工时起绝缘、洗涤、排屑、冷却作用，对切割速度，表面粗糙度，加工精度等有影响。